source : http://www.szivattyu.hu/2011/03/16/viz-alatti-buvarszivattyuk.html
A víz alá kerülő motorral hajtott gépekben rendszerint a következő két fő szerkezeti megoldást találjuk:
- A szivattyú alatt mindig a szállított közegbe bemerülő, belsejükben vízzel vagy fagyálló folyadékkal feltöltött úgynevezett búvármotorok.
- A szivattyú felett részben vagy teljesen a szállított közegbe bemerülő, belsejükben levegővel töltött, esetenként a motor hűtésér külső vízköpennyel létrehozó úgynevezett merülőmotorok.
A búvármotorral létrehozott szivattyúk a búvárszivattyúk (sokan nevezik őket helytelenül csőszivattyúnak, mert szűk fúrócsőbe is behelyezhetők) rendszerint tiszta folyadékot szállítanak.
A merülőmotorokkal viszont olyan merülőmotoros szivattyúkat és keverőket alakítanak ki, amelyek szennyezett közegben is használhatók.
Búvárszivattyúk
Könnyű automatizálhatósága miatt rohamosan terjed a legkülönfélébb felhasználási területeken a búvárszivattyú. A függőleges gépegység alsó része a különleges villamos motor, felső része a több fokozatú szivattyú.
A keskeny csőkútba is beépíthető gép motorja kis átmérőjű, emiatt viszonylag hosszú. A motor alján levő talpcsapágy a szivattyú tengelyirányú súlyát és erőit is hordja. Rendszerint vízkenésű műanyag-szén kombinációjú szegmenscsapágy, amin polírozott rozsdamentes, kemény ellentárcsa forog. A motor álló részét a vízzel teli tértől vagy a tekercselőhuzal vízálló szigetelésű. Ezt poliamid-polietilén kettős réteggel valósítják meg, ahol a szigetelési ellenállást a polietilén, a kopási és sérülés elleni szilárdságot a poliamid adja meg. Ez utóbbi motort nedves tekercselésűnek nevezik.
A motortér víztöltését a környező víztől tömszelence szigeteli el, az üzem közbeni hőtágulást gumimembrán veszi fel. Ezzel elkerüli a motor víztöltés sokszori cserélődését, ami vízkövesedéshez vezetne.
A többfokozatú szivattyú szívótere a motor felett helyezkedik el, rendszerint két hengerpalást felületen szív a gép, amit rozsdamentes szűrőszitával szerelnek fel. A felül levő nyomócsonkra visszacsapó szelep csatlakozik, hogy áramkimaradás esetén visszaáramlás, visszafelé forgás ne következzék be.
Miután a búvárszivattyút úgy bemerítik a vízbe, hogy a legelső szivattyúfokozat már víz alá kerül, a gép indításához nem kell légteleníteni. Rendszerint azt írják elő a gyártóművek,hogy a szivattyú nyomócsonkja fölött még 1 m-es vízborítás legyen. Ezzel elkerülik azt, hogy a vízfelületen kialakuló örvény esetleg levegőt sodorjon be a gépbe.
A búvárszivattyút egyébként nem célszerű szárazon járatni, mert vízkenésű csapágyai ekkor nem kapnak kenést és berágódnak. Ezt sok gyártó villamos szintérzékelővel automatizálja, ami a motorvédő kapcsoló vezéráramkörét szakítja, ha az előírt szint alá süllyedne a víz.
A víz alatt üzemelő villamos motor jó hűtési állapotát fenn kell tartani, ezért el kell kerülni, hogy a motor mellé iszap rakódhasson le. Nagyobb térbe, medencébe ezért úgy építik be a gépet, hogy köpenycsővel a szívást a motor köré terelik. A motor sűrű indítás, egy fázis kimaradása miatt kialakuló nagyobb áramfelvétel túlmelegítheti. Mindenképpen motorvédő kapcsolót kell használni kiegészítő fáziskimaradás elleni védelemmel (segéd relével).Meleg vízzel a búvárszivattyú legfeljebb 70 °C-ig tud üzemelni,mert a motortekercselés szigetelési leolvad. Az ilyen esetekben a szivattyút névlegesen nagyobb motorral kell hajtani, amelyiknek a belső hőfejlődése (részterheléssel) kisebb, mint a hideg vízben használható motoré.
Kutak szívásakor – ha a kút engedélyezett vízhozamánál nagyobb vízszállítású búvárszivattyút építenek be, a kút a vízzel együtt homokot is ad, ez pedig bekerülve a szivattyúba, kopásokat, rések berágódását okozhatja.
Ilyen esetben a következőket célszerű megtenni:
- Leszívás védelmet beépíteni
- A szivattyút lefojtva kell üzemeltetni, itt azonban figyelnünk kell arra, hogy
- A lefojtást a szivattyú normál vízhozamának maximum 10%-áig lehet lefojtani
- A vízáramlási sebessége nem lehet kevesebb, mint 0,15 m/s. Különben a szivattyú hűtése megszűnik és tönkremegy.
- A lefojtást célszerű lehet frekvenciaváltóval megoldani, de a beállításokat (minimum vízhozam) pontosan kell beállítani.
Ajánlatos ezeket a megoldásokat szakszervizzel elvégeztetni!
A csőkút folyadéktere kicsi, ezért ha búvárszivattyút építünk bele, az a megindulás után igen hirtelen leszívja a vízszintet, s a környező talajban az utánfolyás lassú kialakulására nincs idő. Ezért a kútba homok jut be és a szivattyúba levegő is kerülhet. Hogy ez ne forduljon elő, a zárt tolózárral indított szivattyú zárját olyan lassan kell nyitni, hogy a vízszint lehetőleg ne csökkenjen percenként 1m-nél gyorsabban.
A búvárszivattyúk üzeme szinte teljesen zajtalan, ezért csőbe helyezve magasházi nyomásfokozóként is terjednek.
A búvárszivattyúkat a nyomócső tartja a kútban. Indításkor a tartócsövet lökésszerű forgatónyomatékkal terheli a szivattyú, ami menetes karmantyús kötésű csövet kilazíthat, ha nincs a csőkötés eléggé beszorítva, vagy kiszorítás ellen biztosítva.
A búvárszivattyúk fejlődése a miniatürizálás irányában halad: a legkisebb csőátmérő sokáig a 4”-os volt, amibe búvárszivattyút be tudtak építeni, ez alatt, ha í vízszint 8 m-nél mélyebben volt és így önfelszívó szivattyúkkal a vizet kiemelni nem tudták, akkor vízsugárszivattyút építettek be a kút, míg a napszinten többfokozatú szivattyúval táplálták azt. Ez a megoldás körülményes volt (bár legutóbbi időben két műanyag csövön kötötték össze a sugárszivattyút a napszinti szivattyúval), drága és alacsony hatásfokú.
A GRUNDFOS cég kifejlesztette azt a 3”-os kútba is behelyezhető, sugárszivattyú-helyettesítő (JET-Substitute = JS) szivattyúját,ami össze van építve szervesen a tirisztoros frekvenciaváltóval (elektronikus fordulatszám szabályozóval), ez a motor alatt helyezkedik el. A szivattyú fordulatszáma percenként 10 000 feletti – ezzel lehet elérni a méretek csökkenését, miközben a gép el tudja érni a 100 m-es emelőmagasságot is – a gépet egyfázisú áram táplálja, amiből a frekvenciaváltó állítja elő a háromfázisú (lüktető egyen-) áramot. Miután minden ilyen átalakítóban van veszteséghő, amit el kell vezetni, e gépben először a frekvenciaváltót is és a motort is belső frissvízhűtéssel látták el. Vagyis azt a korábbi követelményt, hogy a motort külső vízárammal hűteni kell, itt már nem támasztják: a motort akár be is lehet betonozni, a hűtése megvalósul. A frekvenciaváltó vezérlése mikroprocesszoros, amivel még a következő feladatokat is megvalósítják:
- A gép lágyindítású, vagyis bekapcsolásakor csak 1 A-t vesz fel a hálózatból és csak 4salatt éri el a névleges áramfelvételt, ennek hatására megszűnt a hálózat rángatása.
- A gépet minden védelem nélkül lehet a hálózatra kapcsolni, mert bele van építve a motorvédelem
– feszültséglehúzás
– villámcsapás miatti feszültségingadozás
- túláramfelvétel
- tekercsfej túlmelegedés esetére
- valamin, ha túl sűrű bekapcsolási parancsot kapna a külső vezérléstől
Ez a gép teljesen zárt, se karbantartani nem kell, se javítani nem lehet, kivéve a beépített visszacsapó szelep cseréjét. Alkalmazását az korlátozza, hogy kis benzinmotoros áramfejlesztő aggregát által létrehozott feszültségről nem üzemeltethető.
Ugyancsak a GRUNDFOS cég fejlesztette ki elsősorban vízminták vételére rövidebb üzemideig használható kis mintavevő szivattyút, ahol a motor külön frekvenciaváltó egység táplálja legfeljebb 400 Hz-es frekvenciával (amikor is a szivattyú fordulatszáma 23 000 percenként), s az egész gép belefér 2”-os kútba is. Itt a frekvenciaváltó táplálható kis motoros aggregátról, vagyis az egész mintavételi egység (pl.: szemétlerakó körül fúrt talajvízszennyezés figyelő kutakba kis zárt tehergépkocsiban körbevihető és az összes vízminta gyorsan és kényelmesen vehető. Beleértve a mintavétel előtti kútkiöblítést is,amit éppen a magasabb fordulaton elvégzett öblítés után alacsonyabb fordulaton végrehajtott mintavétel tesz lehetővé. Típusjel: MP 1
A vízmintavétel miatt a szivattyúk csak rozsdamentes acélból és teflon alkatrészekből állnak, hogy se a vízben levő esetleges szennyező anyagok ne támadják meg a szivattyú szerkezetét, se a vízbe a szivattyúval semmilyen szennyeződést ne lehessen bevinni. A szivattyú könnyen szétszedhető és letisztítható, vagyis teljesen a vízmintavétel igényeihez alkalmazkodik. Szilárd szennyeződések e gépeket nagyon gyorsan elkoptatják, ezért ha ilyenre kell számítani, akkor több tartalék hidraulikát kell kéznél tartani és ha az egyik elkopott,gyorsan lehet az újra cserélni.
Showing posts with label szivattyú. Show all posts
Showing posts with label szivattyú. Show all posts
Thursday, June 28, 2012
Víz alatti motorral hajtott gépek II. rész – Merülőmotoros szennyvíz- és zagyszivattyúk
Source : http://www.szivattyu.hu/2011/03/18/viz-alatti-motorral.html
Míg a búvárszivattyúknál a gépet kis átmérőjűre kellett megterezni, hogy beférjen a szűk csőkútba, itt ez a korlátozás nincsen. A normál méretű motorok használhatók, amelyek vagy légtérben, vagy olajjal töltött térben forognak.
A motor nem csúszócsapágyazású, hanem gördülő-csapágyazású. Mivel rendszerint egyfokozatú szivattyút hajt a motor, a szivattyúnak nincsen külön csapágyazása, az a motor tengelyére van felszerelve. A levegőben forgó motor tengelyének eltömítésére a szállított közeg felé a kettős tömítés terjedt el, ahol is a két tömítés közötti tér van megtöltve rendszerint fiziológiailag közömbös, vagyis emberi, állati egészségre ártalmatlan olajjal.
A motor felül helyezkedik el, alatta van az olajtér, azalatt a szivattyú hidraulikája. Ez megkönnyíti az energia hozzávezetést is, mert a gép felső részén kiképzett, a motortértől rendszerint eltömített kapocstér tetején helyezkedik el a masszív kábeltömszelence, így a kábel a szivattyúhoz közvetlenül felülről csatlakozik. Tehát nem kell végigvezetni a szivattyú mellett, mint a búvárszivattyúknál. A motor vagy teljesen, vagy részben merül be üzem közben a szállított közegbe. Ezért a hűtése nem minden üzemállapotban kielégítő, s emiatt fejlődtek ki a hűtőköpenyes gépek.
Kisebb szivattyúkban eleve a motor körül áramlik a nyomótérben a folyadék és a motor tetején felfelé álló nyomócsonkot képeznek ki. Nagyobb szivattyúk nyomócsonkja a gép tengelyére merőlegesen oldalt helyezkedik el, míg a szivattyúkerék vagy járókerék hátlapján elhelyezett bordák keringetik a motorra ráépített hűtőköpenyben a szállított folyadékot, megoldva ennek tisztaságát is, amennyiben távol tartják a kerék peremén a nagyobb szennyeződések bejutását a motor hűtőterébe.
A szivattyú alsó szívónyílására – például szárazaknás kivitelben – szívócső csatlakozhat, de nedves aknás vagy hordozható kivitelben egyszerű szívótorok, amivel abból az aknából szív, amibe beépítették. A kisebb és hordozható gépek azonban sokszor rátámaszkodhatnak a fenékre, ilyenkor a szívócsonkkal szemben támasztótárcsát szerelnek fel és annak kerületén függőleges horonysoron tudja a szivattyú beszívni a szállított közeget. Ezzel azt is megelőzik, hogy a szivattyú talajra helyezve abba mintegy beássa önmagát.
E szivattyúk számos kiviteli példája közül csak példaképpen bemutatunk egyet a jobbra látható ábrán. Ezen a szivattyúkerék kopásálló, a vele szemen levő falak ugyancsak kopásálló gumival borítottak és a félig nyitott járókerékkel szembeni rés mértékét után állító csavarokkal lehet kopás esetén beállítani. A nyomó spirálház végén indul a motort hűtő köpenyben felfelé a víz, és felül ívcsővel csatlakozik a nyomótömlő csatlakoztatására is alkalmas tömlőkapcsos nyomócsonkba.
A szivattyútengelyen kopásálló keményfém csúszógyűrűs tömítés van elhelyezve, s a tömszelence – tér olajjal van feltöltve, ami az esetleges vízbeszivárgás esetén felszorul a motortér tömítésén keresztül a motorba. A motor belsejében ugyanis levegő van és ezt teljesen biztonságos tömítéssel kell bent tartani a víz alatt is. A motor alsó és felső csapágyazása golyóscsapágy, amit zsírral kennek. A felső csapágy zárt (tömítőfedeles) rendszerű, hogy a zsír ne jusson a motor légterébe. Az alsó csapágy alatt a rendszerint kettős szimering gyűrű van vagy itt is csúszógyűrűs tömítés akadályozza meg zsír kijutását,illetve az olaj bejutását a tömítőtérből a motorba.
Mivel e szivattyúk forgó része nagyobb hézaggal illeszkedik a házhoz, a tengely pedig golyós csapágyazású, hosszabb ideig is képes szárazon futni sérülés nélkül. Nem érzékeny a beszívott levegőre se. Amikor iszapos gödröt víztelenítenek vele, arra kell ügyelni, hogy a gép ne ássa magát a talajba, ezért kötélre vagy láncra kell függeszteni. Vigyázva, hogy ne legyen képes elfordulni, tehát például két irányba húzó kötélre függesszük. A magát kikötés híján talajba ásó gép igen sűrű szilárd anyagtartalmú iszapot kaphat, ami erős kopást okoz és túlterheli a szivattyút hajtó motort is, sőt esetleg a kábelt is meghúzhatja, ezzel zárlatot okozva.
A merülőmotoros zagy- és szennyvízszivattyúk villamos bekötését ugyancsak motorvédő kapcsolón keresztül kell a hálózathoz csatlakoztatni. E gépekben rendszerint található olyan beépített hővédelem, a motor állórész tekercselés túlmelegedése esetén beavatkozik (a motortekercselés hőosztályának megfelelően beállított hőfoknál, például ha a szigetelési osztály B, ami 120 °C-nál hőálló tekercselő huzalt jelent, akkor 100 °C-nál jelet ad vagy vezéráramkört szakítva leállítva a szivattyút. Motorvédő kapcsoló nélkül közvetlenül a hálózatra kötött gépek sűrűn leéghetnek,mert nagyobb sűrűségű anyag hirtelen lökésszerű szállítása túlterheli a motort és nincs, ami megvédje.
Állandó beépítéssel mind szárazaknában, mind nedves aknában lehet találkozni. Szárazaknás beépítésű volt az előregyártott vasbeton aknába beépített MOBA, majd továbbfejlesztve a TÁT szennyvízátemelő telep, ahol már tartalékszivattyú is be volt építve.
Nedves aknás beépítésnél szokásos vezetősínes elrendezéssel, nyomócső gyorskapcsolóval kialakítani a gépet. Ilyen gépek vízbe merülve üzemelnek, ezért a motort nem kell a nyomótérrel körülvenni. E gépeket szokás kettős szintkapcsolóval automata átemelő telepeket létrehozni.
Míg a búvárszivattyúknál a gépet kis átmérőjűre kellett megterezni, hogy beférjen a szűk csőkútba, itt ez a korlátozás nincsen. A normál méretű motorok használhatók, amelyek vagy légtérben, vagy olajjal töltött térben forognak.
A motor nem csúszócsapágyazású, hanem gördülő-csapágyazású. Mivel rendszerint egyfokozatú szivattyút hajt a motor, a szivattyúnak nincsen külön csapágyazása, az a motor tengelyére van felszerelve. A levegőben forgó motor tengelyének eltömítésére a szállított közeg felé a kettős tömítés terjedt el, ahol is a két tömítés közötti tér van megtöltve rendszerint fiziológiailag közömbös, vagyis emberi, állati egészségre ártalmatlan olajjal.
A motor felül helyezkedik el, alatta van az olajtér, azalatt a szivattyú hidraulikája. Ez megkönnyíti az energia hozzávezetést is, mert a gép felső részén kiképzett, a motortértől rendszerint eltömített kapocstér tetején helyezkedik el a masszív kábeltömszelence, így a kábel a szivattyúhoz közvetlenül felülről csatlakozik. Tehát nem kell végigvezetni a szivattyú mellett, mint a búvárszivattyúknál. A motor vagy teljesen, vagy részben merül be üzem közben a szállított közegbe. Ezért a hűtése nem minden üzemállapotban kielégítő, s emiatt fejlődtek ki a hűtőköpenyes gépek.
Kisebb szivattyúkban eleve a motor körül áramlik a nyomótérben a folyadék és a motor tetején felfelé álló nyomócsonkot képeznek ki. Nagyobb szivattyúk nyomócsonkja a gép tengelyére merőlegesen oldalt helyezkedik el, míg a szivattyúkerék vagy járókerék hátlapján elhelyezett bordák keringetik a motorra ráépített hűtőköpenyben a szállított folyadékot, megoldva ennek tisztaságát is, amennyiben távol tartják a kerék peremén a nagyobb szennyeződések bejutását a motor hűtőterébe.
A szivattyú alsó szívónyílására – például szárazaknás kivitelben – szívócső csatlakozhat, de nedves aknás vagy hordozható kivitelben egyszerű szívótorok, amivel abból az aknából szív, amibe beépítették. A kisebb és hordozható gépek azonban sokszor rátámaszkodhatnak a fenékre, ilyenkor a szívócsonkkal szemben támasztótárcsát szerelnek fel és annak kerületén függőleges horonysoron tudja a szivattyú beszívni a szállított közeget. Ezzel azt is megelőzik, hogy a szivattyú talajra helyezve abba mintegy beássa önmagát.
E szivattyúk számos kiviteli példája közül csak példaképpen bemutatunk egyet a jobbra látható ábrán. Ezen a szivattyúkerék kopásálló, a vele szemen levő falak ugyancsak kopásálló gumival borítottak és a félig nyitott járókerékkel szembeni rés mértékét után állító csavarokkal lehet kopás esetén beállítani. A nyomó spirálház végén indul a motort hűtő köpenyben felfelé a víz, és felül ívcsővel csatlakozik a nyomótömlő csatlakoztatására is alkalmas tömlőkapcsos nyomócsonkba.
A szivattyútengelyen kopásálló keményfém csúszógyűrűs tömítés van elhelyezve, s a tömszelence – tér olajjal van feltöltve, ami az esetleges vízbeszivárgás esetén felszorul a motortér tömítésén keresztül a motorba. A motor belsejében ugyanis levegő van és ezt teljesen biztonságos tömítéssel kell bent tartani a víz alatt is. A motor alsó és felső csapágyazása golyóscsapágy, amit zsírral kennek. A felső csapágy zárt (tömítőfedeles) rendszerű, hogy a zsír ne jusson a motor légterébe. Az alsó csapágy alatt a rendszerint kettős szimering gyűrű van vagy itt is csúszógyűrűs tömítés akadályozza meg zsír kijutását,illetve az olaj bejutását a tömítőtérből a motorba.
Mivel e szivattyúk forgó része nagyobb hézaggal illeszkedik a házhoz, a tengely pedig golyós csapágyazású, hosszabb ideig is képes szárazon futni sérülés nélkül. Nem érzékeny a beszívott levegőre se. Amikor iszapos gödröt víztelenítenek vele, arra kell ügyelni, hogy a gép ne ássa magát a talajba, ezért kötélre vagy láncra kell függeszteni. Vigyázva, hogy ne legyen képes elfordulni, tehát például két irányba húzó kötélre függesszük. A magát kikötés híján talajba ásó gép igen sűrű szilárd anyagtartalmú iszapot kaphat, ami erős kopást okoz és túlterheli a szivattyút hajtó motort is, sőt esetleg a kábelt is meghúzhatja, ezzel zárlatot okozva.
A merülőmotoros zagy- és szennyvízszivattyúk villamos bekötését ugyancsak motorvédő kapcsolón keresztül kell a hálózathoz csatlakoztatni. E gépekben rendszerint található olyan beépített hővédelem, a motor állórész tekercselés túlmelegedése esetén beavatkozik (a motortekercselés hőosztályának megfelelően beállított hőfoknál, például ha a szigetelési osztály B, ami 120 °C-nál hőálló tekercselő huzalt jelent, akkor 100 °C-nál jelet ad vagy vezéráramkört szakítva leállítva a szivattyút. Motorvédő kapcsoló nélkül közvetlenül a hálózatra kötött gépek sűrűn leéghetnek,mert nagyobb sűrűségű anyag hirtelen lökésszerű szállítása túlterheli a motort és nincs, ami megvédje.
Állandó beépítéssel mind szárazaknában, mind nedves aknában lehet találkozni. Szárazaknás beépítésű volt az előregyártott vasbeton aknába beépített MOBA, majd továbbfejlesztve a TÁT szennyvízátemelő telep, ahol már tartalékszivattyú is be volt építve.
Nedves aknás beépítésnél szokásos vezetősínes elrendezéssel, nyomócső gyorskapcsolóval kialakítani a gépet. Ilyen gépek vízbe merülve üzemelnek, ezért a motort nem kell a nyomótérrel körülvenni. E gépeket szokás kettős szintkapcsolóval automata átemelő telepeket létrehozni.
Tuesday, June 26, 2012
Wednesday, June 13, 2012
The advantages of Grundfos pumps
Although pumps and sewage is not an interesting subject to talk about but they are still one of many conveniences that we got used to and simply cannot live without. This is due to the fact that we are accustomed to having them and we cannot imagine living without them. For instance, in the cold winter when nature hits us with a freezing winter, we cannot survive this harsh winter without central heating system and hot water circulating systems. This is why when these systems fail or malfunction; it becomes a disaster that has to be dealt with instantly. This is why Grundfos pumps have become a necessity in every home.
Grundfos pumps are found in any domestic heating systems, especially in the heating and hot water systems. They can also be used in processing water waste and sewage. Grundfos pumps are known for their quality and high standards. They are made of only the best of materials that would meet the world’s standards for hygiene. They are also known for their flexibility. This flexibility allows them to be used in many fields. For instance, these pumps can be used in pharmaceuticals, biotechnology, alcohol infusions and personal care.
Not only that, but Grundfos pumps can also be used in the food industry such as soft drink mixing, dairies, breweries and beer. Lastly, it can be used in other fields such as semi-conductor rising, cleaning solutions and water treatment. All of these different fields vouch for the performance and the high quality of the pumps as they cover all kinds of usage, whether commercial, industrial or residential.
Grundfos pumps are also a very good choice for water system that is based on renewable energy. This kind of water system is very suitable for people who live in a place that is located far from the main water and electricity grid. These pumps are also suitable for you if you live in a three or a four storey house as these pumps will give the water the needed push in order to reach the higher stories.
Lastly, the last advantage of using Grundfos pumps, besides the quality and high standards. You are guaranteed to get one of the best post purchase client service. As Grundfos pumps has service centers in more than fifty countries. So wherever you are you are guaranteed to get the customer service that you need.
Click here to learn more about Grundfos pumps.
Grundfos pumps are found in any domestic heating systems, especially in the heating and hot water systems. They can also be used in processing water waste and sewage. Grundfos pumps are known for their quality and high standards. They are made of only the best of materials that would meet the world’s standards for hygiene. They are also known for their flexibility. This flexibility allows them to be used in many fields. For instance, these pumps can be used in pharmaceuticals, biotechnology, alcohol infusions and personal care.
Not only that, but Grundfos pumps can also be used in the food industry such as soft drink mixing, dairies, breweries and beer. Lastly, it can be used in other fields such as semi-conductor rising, cleaning solutions and water treatment. All of these different fields vouch for the performance and the high quality of the pumps as they cover all kinds of usage, whether commercial, industrial or residential.
Grundfos pumps are also a very good choice for water system that is based on renewable energy. This kind of water system is very suitable for people who live in a place that is located far from the main water and electricity grid. These pumps are also suitable for you if you live in a three or a four storey house as these pumps will give the water the needed push in order to reach the higher stories.
Lastly, the last advantage of using Grundfos pumps, besides the quality and high standards. You are guaranteed to get one of the best post purchase client service. As Grundfos pumps has service centers in more than fifty countries. So wherever you are you are guaranteed to get the customer service that you need.
Click here to learn more about Grundfos pumps.
Grundfos instant hot water system
Having an instant hot water circulating system has so many advantages. The top two advantages are that it saves a lot of water and that you do not have to wait for water to be heated. Instant hot water systems also save a lot of water that would be wasted down the drain and saves a lot of energy. Another advantage is that it decreases the green house gasses that get released into the air. These gasses are the result of the energy that is used to process and pump the water and during sewage. There are many circulating system these days that would offer instant hot water. The most famous one of them is provided by Grundfos pumps.
People view the term “instant hot water” differently. Some people say that getting hot water after 1 or 2 seconds after opening the tap is instant hot water. Some say that it has to instant as soon as you open the tap. The sure thing is that there is always a waiting period for the hot water to arrive. Grundfos pumps offer this type of hot water circulating systems.
The most common view of instant hot water is that it comes after one or two of seconds after opening the water tap. If you want to know how they work, Grundfos system for instance works by having the water circulate in an endless loop. This loop starts at the water heater outlet then passed at all the fixtures and then back to the water heater once again. This circulating system is the only way for the users to get near instant hot water.
Although this Grundfos circulating system might look like a great idea at first glance, but things change after looking closer. It has many disadvantages; the first one is that it consumes great amounts of energy. As this system uses a lot of energy to keep the whole system hot and to make sure that the water at the heater is as hot as it can be. If you think about it, the energy used to heat the water costs more than the water that is being heated.
The second disadvantage is that continues circulating systems is not compatible with water heaters that have no tanks. The problem here is that these kinds of water heaters will take a lot of time for the water to be heated, more than the traditional plumbing systems. If you can live with these two disadvantages, then Grundfos continues circulating systems is the best option for you.
Learn more about Grundfos szivattyú by visiting szivattyu.hu
People view the term “instant hot water” differently. Some people say that getting hot water after 1 or 2 seconds after opening the tap is instant hot water. Some say that it has to instant as soon as you open the tap. The sure thing is that there is always a waiting period for the hot water to arrive. Grundfos pumps offer this type of hot water circulating systems.
The most common view of instant hot water is that it comes after one or two of seconds after opening the water tap. If you want to know how they work, Grundfos system for instance works by having the water circulate in an endless loop. This loop starts at the water heater outlet then passed at all the fixtures and then back to the water heater once again. This circulating system is the only way for the users to get near instant hot water.
Although this Grundfos circulating system might look like a great idea at first glance, but things change after looking closer. It has many disadvantages; the first one is that it consumes great amounts of energy. As this system uses a lot of energy to keep the whole system hot and to make sure that the water at the heater is as hot as it can be. If you think about it, the energy used to heat the water costs more than the water that is being heated.
The second disadvantage is that continues circulating systems is not compatible with water heaters that have no tanks. The problem here is that these kinds of water heaters will take a lot of time for the water to be heated, more than the traditional plumbing systems. If you can live with these two disadvantages, then Grundfos continues circulating systems is the best option for you.
Learn more about Grundfos szivattyú by visiting szivattyu.hu
Grundfos hot water circulating
Hot water has become a necessity in our lives. We are accustomed to getting instant hot water when we need it. If you ever wondered how you get instant hot water without having to wait for the water to be heated, the answer is simple. It is called a hot water circulating pipe system, which is essential in buildings, especially residential buildings. It provides the residents with hot water as soon as they open the water tap. Besides supplying them with instant hot water, it saves a lot of water that used to get wasted down the drain while using traditional methods. One of the famous circulating systems is provided by Grundfos, Taco among others.
As mentioned above, these traditional circulating systems waste a lot of water and they are very expensive as they use a lot of energy to keep the pipes hot at all times. For instance, the Grundfos circulating systems of hot water creates an endless loop of pipes. These pipes form a loop from the water fixtures to the water heater and back to the fixtures once again. The hot water is pushed by a pump through the loop. This kind of circulating system offers near instant hot water for the users but as mentioned, they are very expensive.
Grundfos has recently released a new generation of circulating systems that is very suitable for residential usage. This system does not have a dedicated return line for the hot water. There is a pump that is linked with the outlet of the water heater. At each water fixture; there is a valve that has a thermal sensor.
These valves connect between the cold and hot water pipe lines. When these valves and their sensors indicate the existence of cold water, water is transferred from the hot water line to the cold line and when hot water is at the valve, the valve then closes. This is done to ensure the existence of hot water at the fixtures at all times. Although this Grundfos system is effective but it does not supply the users with very hot water but it supplies them with luke warm water.
The great thing about Grundfos pipes and systems is not only the quality but the fact that you are guaranteed to get the best post purchase customer service. As Grundfos has authorized service centers in over 50 countries with more than 600 service centers.
For more details visit szivattyu.hu
As mentioned above, these traditional circulating systems waste a lot of water and they are very expensive as they use a lot of energy to keep the pipes hot at all times. For instance, the Grundfos circulating systems of hot water creates an endless loop of pipes. These pipes form a loop from the water fixtures to the water heater and back to the fixtures once again. The hot water is pushed by a pump through the loop. This kind of circulating system offers near instant hot water for the users but as mentioned, they are very expensive.
Grundfos has recently released a new generation of circulating systems that is very suitable for residential usage. This system does not have a dedicated return line for the hot water. There is a pump that is linked with the outlet of the water heater. At each water fixture; there is a valve that has a thermal sensor.
These valves connect between the cold and hot water pipe lines. When these valves and their sensors indicate the existence of cold water, water is transferred from the hot water line to the cold line and when hot water is at the valve, the valve then closes. This is done to ensure the existence of hot water at the fixtures at all times. Although this Grundfos system is effective but it does not supply the users with very hot water but it supplies them with luke warm water.
The great thing about Grundfos pipes and systems is not only the quality but the fact that you are guaranteed to get the best post purchase customer service. As Grundfos has authorized service centers in over 50 countries with more than 600 service centers.
For more details visit szivattyu.hu
Grundfos customer support
Before you decide to buy anything especially pumps, you will have to make sure that they have excellent customer support that would available at all times. This is due to the fact that whatever we buy will get broken and will need to be repaired at one point. This is why customer service is very vital. This is one of the main advantages of buying Grundfos pumps, as they have one of the bests post purchase customer service on the market.
If you have purchased Grundfos pumps, then you can call and ask for the help of the Grundfos repair team anytime. This team is able to repair and fix any malfunction in your current pump system. They will fix and maintain your pump system and will make it as good as new. Although, it is worth mentioning that if your pump system is very old then it will have to be repaired a lot and sometimes it is cheaper to upgrade than to keep repairing it year after year. Another advantage is that the service team is available for you wherever you live. This is due to the nationwide spread of customer service centers and authorized local partners. Not only that, but it also offers worldwide customer service. This guarantees high quality service that will help you maintain and fix your pumps wherever you live.
As mentioned above, it is available wherever you are, but it is also available whenever you need. This is because the service centers are available around the clock. Twenty four hours a day, seven days a week. So, whenever you need customer support, you will have more than six hundred authorized Grundfos servicer center at your service.
Grundfos also have one of the strongest logistics systems as the company ships spare parts around the clock. These spare parts can be ordered separately or they can be ordered as a part of the Service Agreement between the client and the company. The company offers worldwide delivery service as the company can ship the spare parts you need from their warehouses around the world directly to you in a matter of twenty four hours.
To sum things up, Grundfos offers you one of the best post purchase customer service on the market. It has authorized service centers in more than fifty countries around the world represented in more than six hundred centers. So whenever you are or whenever you need support, you are guaranteed to get it.
Visit http://www.szivattyu.hu/ for more details about Grundfos.
If you have purchased Grundfos pumps, then you can call and ask for the help of the Grundfos repair team anytime. This team is able to repair and fix any malfunction in your current pump system. They will fix and maintain your pump system and will make it as good as new. Although, it is worth mentioning that if your pump system is very old then it will have to be repaired a lot and sometimes it is cheaper to upgrade than to keep repairing it year after year. Another advantage is that the service team is available for you wherever you live. This is due to the nationwide spread of customer service centers and authorized local partners. Not only that, but it also offers worldwide customer service. This guarantees high quality service that will help you maintain and fix your pumps wherever you live.
As mentioned above, it is available wherever you are, but it is also available whenever you need. This is because the service centers are available around the clock. Twenty four hours a day, seven days a week. So, whenever you need customer support, you will have more than six hundred authorized Grundfos servicer center at your service.
Grundfos also have one of the strongest logistics systems as the company ships spare parts around the clock. These spare parts can be ordered separately or they can be ordered as a part of the Service Agreement between the client and the company. The company offers worldwide delivery service as the company can ship the spare parts you need from their warehouses around the world directly to you in a matter of twenty four hours.
To sum things up, Grundfos offers you one of the best post purchase customer service on the market. It has authorized service centers in more than fifty countries around the world represented in more than six hundred centers. So whenever you are or whenever you need support, you are guaranteed to get it.
Visit http://www.szivattyu.hu/ for more details about Grundfos.
Grundfos remote management
Grundfos pumps have so many advantages. One of the main advantages is that they have the ability to be controlled and managed form a remote location. Grundfos remote management is very cheap and very secure and it allows you to monitor and manage the installation of the pumps through the internet. This remote management system is very suitable for commercial buildings, wastewater networks and water supply tanks. As this kind of systems would give you alerts and warnings incase anything happens that requires attention. One of the main advantages of this system is that it replaces the regular inspections that have to be done on site, which costs a lot of money and wastes a lot of time.
It is the best solution for remote management even better than the most commonly used SCADA systems. The main advantage that Grundfos remote management systems has over SCADA is that it costs way less. As the amount of money that has to be paid as an investment in the beginning is very small and the fee that has to be paid afterwards is very small and it covers a variety of things such as hosting, data transference and technical support.
Learn more about Grundfos szivattyú
Grundfos remote management examples:
This remote management system can be used to monitor and manage the energy consumptions of the pumps, to control maintenance and to share documentations among other things. Here are a few examples of the usage of the Grundfos remote management systems
The first usage is for water treatment plants, as it can be used to manage the water level in tanks and pressure indicators. It also gives regular reports concerning operational and power usage data. The second usage is in construction sites, as it can be used to give the owner alarms if any malfunction or any kind of breakdown occurs. The third usage for Grundfos pumps remote management system is in irrigation as it can be used to manage the water levels in the tanks, the pressure sensors and to guarantee that all the crops are getting the amount of water needed. Lastly, it can be used in wastewater pumping networks where it can monitor and manage the sensors and the wastewater pumping process and it produces any needed reports.
Grundfos remote management system can also be used to elevate the performance of your current system. It can carry out a performance analysis of your current pump system and will give you tips and hints on how to increase the efficiency of your own system.
It is the best solution for remote management even better than the most commonly used SCADA systems. The main advantage that Grundfos remote management systems has over SCADA is that it costs way less. As the amount of money that has to be paid as an investment in the beginning is very small and the fee that has to be paid afterwards is very small and it covers a variety of things such as hosting, data transference and technical support.
Learn more about Grundfos szivattyú
Grundfos remote management examples:
This remote management system can be used to monitor and manage the energy consumptions of the pumps, to control maintenance and to share documentations among other things. Here are a few examples of the usage of the Grundfos remote management systems
The first usage is for water treatment plants, as it can be used to manage the water level in tanks and pressure indicators. It also gives regular reports concerning operational and power usage data. The second usage is in construction sites, as it can be used to give the owner alarms if any malfunction or any kind of breakdown occurs. The third usage for Grundfos pumps remote management system is in irrigation as it can be used to manage the water levels in the tanks, the pressure sensors and to guarantee that all the crops are getting the amount of water needed. Lastly, it can be used in wastewater pumping networks where it can monitor and manage the sensors and the wastewater pumping process and it produces any needed reports.
Grundfos remote management system can also be used to elevate the performance of your current system. It can carry out a performance analysis of your current pump system and will give you tips and hints on how to increase the efficiency of your own system.
Saturday, April 21, 2012
What are Grundfos products?
The company is also working on expanding its reach, as it is invading markets all over the world to offer its services to as many people as it can. It has opened a market for itself in Mexico. And future plans holds extension of its market in the Far East and in the developing countries in Africa.
If you are looking for the best pumps in the market, its Grundfos pumps you are looking for. This is due to the fact that Grundfos designs and manufactures one of the best pumps in the market. They have the experience and history needed, as they have been in this industry for over 65 years. They only use state of the art technology and they integrate it with the best metals to insure and guarantee high quality and optimum performance of their pumps.
Grundfos never stops in expanding its market or its products, as the company has invaded other markets within the pumping market, for example, its entrance in the cutting-edge electronics that control these pumps. One of the most popular types of its pumps is the Grundfos 15-42, is lies under the circulating pump category. And lastly, one of the amazing things about this company, that it has one of the best post purchase customer service that would allow you to get the most out of their products.
Grundfos pumps came along way since they entered the market 65 years ago in 1945; it has become one of the biggest and most successful companies in this industry. It was founded as mentioned in 1945 in Denmark, in the city of Bjerringbro. It was founded by Poul Due Jensen. Before it was called Grundfos pumps, it was called Bjerringbro Die-Casting and Machine Factory. Now the company has over forty thousand employees distributed among forty different countries. And it is estimated to produce about 12 million units per year. The company offers and produces a wide variety of pumps. They include centrifugal pumps, circulator pumps and submersible pumps. The sales of these pumps represent about 50 percent of the total sales count of these commodities in the international market.
Grundfos Pump Company
If you are looking for the best pumps in the market, its Grundfos pumps you are looking for. This is due to the fact that Grundfos designs and manufactures one of the best pumps in the market. They have the experience and history needed, as they have been in this industry for over 65 years. They only use state of the art technology and they integrate it with the best metals to insure and guarantee high quality and optimum performance of their pumps.
Grundfos never stops in expanding its market or its products, as the company has invaded other markets within the pumping market, for example, its entrance in the cutting-edge electronics that control these pumps. One of the most popular types of its pumps is the Grundfos 15-42, is lies under the circulating pump category. And lastly, one of the amazing things about this company, that it has one of the best post purchase customer service that would allow you to get the most out of their products.
Grundfos pumps came along way since they entered the market 65 years ago in 1945; it has become one of the biggest and most successful companies in this industry. It was founded as mentioned in 1945 in Denmark, in the city of Bjerringbro. It was founded by Poul Due Jensen. Before it was called Grundfos pumps, it was called Bjerringbro Die-Casting and Machine Factory. Now the company has over forty thousand employees distributed among forty different countries. And it is estimated to produce about 12 million units per year. The company offers and produces a wide variety of pumps. They include centrifugal pumps, circulator pumps and submersible pumps. The sales of these pumps represent about 50 percent of the total sales count of these commodities in the international market.
Grundfos Pump Company
Grundfos Pump Company
Grundfos has various product lines and equipments, these product lines have made the company achieve an outstanding turnover of DDK 13 billion. It has a huge number of employees, as it has over 14 thousand employees scattered over 40 different countries. The company is known for doing all what is necessary when designing and manufacturing the pumps in order to pass and meet all kinds of standards, whether domestic or international. This made its pumps able to fit in any application, Irrigation equipment, dosing, mining, municipal waste water and other applications.
Grundfos pumps is one of the best companies that develop and produce pumps for all applications. Its’ pumps can be used domestically, as in a 3 or a 4 story house, domestic hot and cold water recirculation and heat recovery units. And it can be used commercially as well, such in pharmaceutical labs and others. Being able to meet the specifications of these applications shows how versatile and flexible these Grundfos pumps are, which vouches for its quality. Plus, it has the needed experience to be the best in its field, as it has been in this market for over 65 years.
Grundfos also succeeded in acquiring PACO. PACO is a well known and reputed company that works with machinery of different kinds and surfacing technology. It has almost 10,000 employees and has achieved an amazing turnover worth CHF2 billion.
The company also managed to make a place for itself in Mexico, as it will supply Mexico with the pumps needed for the Mexican market. The company also plans to extend its existence in developing countries, especially in Africa. It also plans to extend its market in the Far East, including China and Russia.
As for the pumps that the company produces, one of its very successful and famous pumps is the Grundfos 15-42, which is a circulating pump. What makes this pump very unique is that it has a set of amazing features that makes it able to fit in many applications. It can withstand semi-arid, industrial, commercial and other demanding conditions. The company uses a wide array of metals during the design and the manufacturing of this pump in order to guarantee its quality and optimum performance.
Grundfos pumps is one of the best companies that develop and produce pumps for all applications. Its’ pumps can be used domestically, as in a 3 or a 4 story house, domestic hot and cold water recirculation and heat recovery units. And it can be used commercially as well, such in pharmaceutical labs and others. Being able to meet the specifications of these applications shows how versatile and flexible these Grundfos pumps are, which vouches for its quality. Plus, it has the needed experience to be the best in its field, as it has been in this market for over 65 years.
Grundfos also succeeded in acquiring PACO. PACO is a well known and reputed company that works with machinery of different kinds and surfacing technology. It has almost 10,000 employees and has achieved an amazing turnover worth CHF2 billion.
The company also managed to make a place for itself in Mexico, as it will supply Mexico with the pumps needed for the Mexican market. The company also plans to extend its existence in developing countries, especially in Africa. It also plans to extend its market in the Far East, including China and Russia.
As for the pumps that the company produces, one of its very successful and famous pumps is the Grundfos 15-42, which is a circulating pump. What makes this pump very unique is that it has a set of amazing features that makes it able to fit in many applications. It can withstand semi-arid, industrial, commercial and other demanding conditions. The company uses a wide array of metals during the design and the manufacturing of this pump in order to guarantee its quality and optimum performance.
Grundfos Pumps
Grundfos pumps are made of only the best of quality materials, they are made to pass and meet the various international standards for hygiene. They also pass the strictest standards there is. They are also known for their versatility, as they are very flexible, because they can be adapted to fit in any situation.
Pumps are not a very interesting topic to talk about, but despite that, pumps are one of the many modern conveniences that we can’t survive without. We all got used to their existence that we can’t imagine life without them. For example, nature sometimes hits us with a very cold winter, but thanks to the central heating systems we have in our houses, we are able to survive the cold. But imagine if these systems fail, that would be devastating. So let’s know more about pumps, because it’s these heating systems and their pumps are the ones keeping us warm during the chilling winter. Pumps can be found in the domestic heat systems, especially in the hot water and heating systems, one of the very famous brands are Grundfos pumps. Not only that, but Grundfos pumps can be used in water waste and sewage as well.
Grundfos pumps can also be used in water systems that are based on renewable energy. This kind of water systems can be very useful if you live in a place outside of the main electricity grid. Also when living in a 3 or a 4 story house, in order for water to reach the upper stores, a pump is needed, to give water that extra push and pressure to go upwards.
For example, they can be used in biotechnology, nutrient and pure water systems. It is a known fact that when Grundfos designs its pumps, they make sure to follow all the procedures necessary in order to meet and pass the sanitary and hygiene standards. They also produce and developed pumps of high quality that can be used for various applications, whether commercial or domestic.
To sum it up, this kind of pumps is the best choice to whatever need, whether it is domestic, commercial or industrial, is works for all purposes.
Pumps are not a very interesting topic to talk about, but despite that, pumps are one of the many modern conveniences that we can’t survive without. We all got used to their existence that we can’t imagine life without them. For example, nature sometimes hits us with a very cold winter, but thanks to the central heating systems we have in our houses, we are able to survive the cold. But imagine if these systems fail, that would be devastating. So let’s know more about pumps, because it’s these heating systems and their pumps are the ones keeping us warm during the chilling winter. Pumps can be found in the domestic heat systems, especially in the hot water and heating systems, one of the very famous brands are Grundfos pumps. Not only that, but Grundfos pumps can be used in water waste and sewage as well.
Grundfos pumps can also be used in water systems that are based on renewable energy. This kind of water systems can be very useful if you live in a place outside of the main electricity grid. Also when living in a 3 or a 4 story house, in order for water to reach the upper stores, a pump is needed, to give water that extra push and pressure to go upwards.
For example, they can be used in biotechnology, nutrient and pure water systems. It is a known fact that when Grundfos designs its pumps, they make sure to follow all the procedures necessary in order to meet and pass the sanitary and hygiene standards. They also produce and developed pumps of high quality that can be used for various applications, whether commercial or domestic.
To sum it up, this kind of pumps is the best choice to whatever need, whether it is domestic, commercial or industrial, is works for all purposes.
Friday, March 9, 2012
Subscribe to:
Posts (Atom)